Scottoiler eSystem v3.1 - Motorcycle Chain Oiler

---

The main components of the kit are the eSystem Reservoir (REP), the dispenser (which feeds oil onto the chain and sprocket from the chain oiler), a 250ml bottle of Scottoil suitable for approximately 8,000 kilometres, tubing and clips for a variety of fitting options, plus a set of installation instructions and an operating guide.

The eSystem unit can be mounted in different locations, e.g. onto the frame or under the seat, depending on rider preference.

The eSystem is an electronically pumped motorcycle chain oiler requiring only a small power feed from the battery to operate. It can be installed on most bikes in under an hour by connecting the wiring loom to the battery; this plug and play connectivity means the eSystem is the easiest electronic motorcycle chain oiler ever developed.  Unlike some other products, there is no complicated wiring or tapping into speedometers or switches.

The eSystem is designed to give the rider maximum flexibility and adjustability of their flow rate and allows for simple, one-touch changes to adjust the rate to suit conditions.  Therefore the eSystem puts the rider in control and provides simple, intuitive means to dynamically adjust the rate to suit your needs.

The eSystem senses vibration and movement with a triple axis accelerometer, using technology derived from MotoGP.  It will sense when the engine is running and power on, then once moving – even at constant motorway cruising speeds – the sensor will monitor engine vibrations and trigger the eSystem’s oiling mode.  The system displays this information on the screen along with the flow rate, the temperature in Celsius, and oil level alongside the accelerometer readout.

Using this technology the unit will go into deep sleep mode when you finish your ride, drawing a minimal amount of power from your bike’s battery. When you start your next ride the xSystem will wake up from the sleep mode and continue maintaining your chain.